8. TROUBLESHOOTING
a. Ensure you are using quality multiple shielded cables with quality radial or
compression F-connectors.
b. Ensure the F-connector’s center conductor is making solid contact with the C-
SAW860’s
Video Input, Audio Input, and RF Output
ports.
c. If the CT-SAW860 is receiving power but no signal, check to be sure the video and/or
audio input cables are securely connected with their respective Video Output and
Audio Output ports on the video source and the Video Input and Audio Input ports on
the CT-SAW860. Also ensure the cable is securely connected at the CT-SAW860’s
RF Output
port and the combiner’s input ports.
d. When taking measurements it is always best to use a quality signal level meter. For
initial individual CT-SAW860 setup measurements may be taken from the unit’s RF
Output port. System level measurements, however, should be taken from the
combiner’s output. For field maintenance, the CT-SAW860’s Output Test port may
be used. However, note that port is padded down -30dB that must be taken into
consideration when determining individual unit level settings and output.
e.
Further troubleshooting assistance can be found on-line at
www.northamericancable.com
and
www.cabletronix.com
in addition to support from
Cabletronix sales engineers at 1-610-429-1511.
This is a notice to inform you that content passing thru this device may contain
strong language or depictions of violence, sex or substance abuse. This unit contains
no parental control features. Parental discretion is advised
6