User Techniques and Applications
The Equitek
E-200
can be used in a broad number of applications, ranging from live reinforcement to the most critical studio situations. The
E-200
is ideal for vocals and
voice overs, yet it also excels at some of the most demanding instrumental projects. The
E-200
is great for virtually all acoustic, wind, and amplified instruments. It will even
handle the explosive dynamics of drum kits with ease. The
E-200
has been proven to be outstanding in all of these applications and more. Its uncolored sonic characteristics allow
you to decide how a instrument or vocal will sound in the mix.
Specifications
Type:
Side Address, Dual Capsule Electret Condenser
Frequency Response:
10-18 kHz (See Back Cover)
Polar Patterns:
Cardioid, Figure eight, Omnidirectional (See Back Cover)
Impedance:
Low (200 ohms nominal).
Output Level At 1 kHz.:
Power Level:
-34 dB (0 dB = 1 mW per 10 microbars).
Open Circuit Voltage:
-55 dB (0 dB = 1 volt per microbar).
17.8 mV/Pascal.
Dynamic Range:
132 dB.
Equivalent Noise Level:
16 dB Equivalent SPL, A weighted
Maximum Output Level:
With pad, .89 dBV
Without pad, 8.9 dBV
Maximum SPL:
148 dB SPL (With pad on)
Total Harmonic Distortion:
Less than 0.15%
Signal-To-Noise Ratio:
78 dB (At 94 dB SPL)
Capsule Capacitance:
60 pF
Powering:
Minimum Requirements are 48 - 52 Volts Phantom Power capable of
delivering at least 8 mA. or CAD EPS-1 high current 24 volt supply.
Connector:
Three pin male XLR type.
Finish:
Durable black urethane. Brass plated front screen.
Dimensions:
2.5" (63.5 mm) Dia., x 9.312" (236.5 mm) High
Net Weight:
29.3 oz. (830 grams)
Included Accessories:
SM-1 ....... Swivel Mount
Optional Accessories:
ZM-1 ....... Shock Mount (See cover photo)
EPS-1 ...... High Current Phantom Power Supply
WS-1 ....... Foam Windscreen
40-350 .... 50 ft. broadcast quality extension cable terminated with
professional 3 pin male/female connectors
40-351 .... 100 ft. broadcast quality extension cable
40-352 .... 25 ft. broadcast quality extension cable
TWO-YEAR LIMITED WARRANTY
CTI Audio, Inc. (CAD) hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the
unlikely event a defect occurs CAD will, at its option, either repair or replace with a new unit of equal or greater value. You should retain proof of purchase to validate the purchase
date and return it with any warranty claim. Return warranty claims carefully packed, insured and prepaid to the Service Department at the address listed below.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to CADs instructions or unauthorized repair. All implied
warranties or merchantability or fitness for a particular purpose are hereby disclaimed and CAD hereby disclaims liability for incidental, special or consequential damages
resulting from the use or unavailability of this product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.
Note: No other warranty, written or oral is authorized by CTI Audio, Inc.
Shown with included SM-1 swivel mount.
Summary of Contents for E-200
Page 1: ......
