background image

1

1

CAUTION

Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to 

avoid endangering your life. If still more gas appliances and/or occupants using gas are added to the space, additional ventilation 

must be provided.

IMPORTANT

Read these instructions carefully so as to familiarise yourself with the appliance before fitting the appliance to a gas cylinder.

Retain these instructions for future reference.

GB

1. General

•  This appliance complies with SANS 1539: 2017

•  This appliance must only be used with an approved hose and regulator. (A 2.8kPa hose and regulator supplied only in South Africa)

•  The gas cylinder is to be used only in the upright position.

•  Gas appliances require ventilation for efficient performance and to ensure the safety of users and other persons in close proximity.

• 

Warning:

 Accessible parts may be very hot. Keep young children away.

•  After use, turn off the gas supply at the cylinder, and then at the control knobs.

• 

Use outdoors only!

Allowable gases and
operating pressure

LPG

Jet number

0.86

Nominal usuage

Butane - 218 g/hper burner

(218 g/h x 3 = 654 g/h in total)

Gross nom. heat input

3 kW per burner

(3 kW x 3 = 9kW in total)

Gas supply sources:

a)

A refillable gas container not exceeding 9 kg and complying with local regulation in force.

2. Safety information

•  The hose and seal on the regulator must be checked for wear or damage before every use and before connecting to the gas cylinder 

(see fig.1).

•  Ensure the appliance is used away from flammable materials. Minimum safe distances are 1.2m above the appliance and 600mm to 

the rear and sides of the appliance (see fig. 2).

•  Do not use an appliance that is damaged, leaking, or which does not operate properly.
•  Keep gas cylinders away from heat and flames. Do not place on a stove or any other hot surface.
•  Ensure that the assembled unit is stable and does not rock.
•  Do not cover or change the primary air supply openings in the burners as this will affect the performance of the product and may lead 

to an unstable flame.

•  In the event of burn back, (where the flame burns back and ignites at the jet), immediately turn off the gas supply by first closing the 

control valve on the gas cylinder and then the appliance valve. After the flame is extinguished remove the regulator and check the 
condition of its seal.  Replace the seal if in doubt. Re-light the appliance as described in Section 3 below. Should the flame light back 
persistently return the product to your authorized CADAC repair agent.

•  If there is a leak on your appliance (smell of gas), immediately close the control knob on the gas cylinder. If you wish to check for 

leaks on your appliance, do it outside. Do not try to detect leaks using a flame; use soapy water.

•  The correct way is to smear the joints with soapy water. If a bubble or bubbles form then there is a gas leak. Immediately turn off the 

gas supply firstly by closing the control valve on the gas container and then the appliance valve. Check that all the connections are 
properly fitted. Re-check with soapy water. If a gas leak persists, return the product to your CADAC dealer for inspection / repair.

•  Do not modify the appliance or use it for anything which it has not been designed for.
•  During use, part of the appliance will become hot, particularly the cooking areas and the hood. Avoid touching hot parts with your bare 

hands. The use of oven gloves is recommended.

•  Keep young children away from the appliance at all times.
•  This appliance consumes oxygen and needs ventilation for optimum performance and for the safety of those in close proximity.
•  Do not move the appliance while in use.
•  The parts sealed by the manufacturer or its agent must not be altered by the user.
• 

Use outdoors only.

503-0733 LEV6 (1192-09) Braai Mate - User Manual (SA).indd   1

2019/07/16   10:19:48

Summary of Contents for Braai Mate 1192-09









Reviews: