3-20
7496 Dual Input Channel
J-Type
Revision J2005-2
Press the “PRE INS” button to re-route the EQ and Filter sections ‘pre’ the insert
point.
61517<
/3)
#
)UHTXHQF\
Variable frequency control for the Low Pass Filter. The ‘knee’ frequency can be var-
ied from 1.2kHz to 20kHz.
615183
+3)
#
)UHTXHQF\
#
Variable frequency control for the High Pass Filter. The ‘knee’ frequency can be var-
ied from 14Hz to 400Hz.
615184
,QVHUW
#
¶,Q
2
2XW·
Stereo input channels have a “SEND” and “RETURN”
break-jack facility. This is to
allow the channel signal to be sent out to, and returned from an external audio-pro-
cessing unit. The channel signals are always present at the “SEND” jack, but when
‘insert’ is not selected, the channel signals will by-pass the “RETURN” jack.
Press the “INS” button to ‘open’ the “RETURN” jack and receive the modified signal
from the external audio-processing unit.
615185
$OO
#
0RGXOH
#
,VRODWH
This function ‘isolates’ the module switch data from the computer. There are many
instances during a production rehearsal, when module routing or level changes need
to be made to solve a problem.
When you are rehearsing a sequence of cues, there may not be time to record the
changes in all of the cues that are affected. When you press the ‘ISOLATE’ button,
previously recorded switch data will be ignored by the module, leaving the switches
at their new setting until you cancel the function.
615186
0DLQ
#
3)/
Press this button to ‘listen’ to the channel signals pre-fader.
615187
&KDQQHO
#
0XWH
Press this button to mute the channel manually.
The MUTE switch has a secondary function when used in conjunction with the
CHECK switch, (located on the OSC Module). If a channel is muted (MUTE switch
‘On’) and the CHECK switch is pressed, the muted channel is unmuted, but all other
channels are forced into MUTE. This allows the originally muted channel(s) to have a
‘SOLO’ function.
615188
3RWHQWLRPHWHU
#
¶5HFDOO·
#
:DUQLQJ
This LED will ‘flash’ when any potentiometer on the module is at a different position
to that recorded in the current cue.
615189
¶5HFDOO·
#
1XOO
#
'LUHFWLRQ
#
/('V
A pair of LEDs that indicate the direction you need to turn the current potentiometer
Summary of Contents for J-Type
