6. Fast Heat-up - The Griddle preheats very quickly. These Griddles use both direct and infrared heat to quickly cook your
foods to perfection. It is not necessary to leave your Griddle on throughout the service period. To preheat the Griddle,
simply set the desired cooking temperature. You will notice the power light illuminates, indicating that power is going to
the Griddle. Your Griddle will be preheated and ready to start cooking in about 2 or 3 minutes. When the power light is
no longer illuminated, the Griddle is ready to use.
7. Use only a stainless steel spatula with rounded corners for positioning and removing food from the grilling surface, to
avoid scratches on the glass-ceramic surface.
8. This Glass-Ceramic Griddle is designed to allow the operator to place frozen foods directly on the heated griddle surface
without causing damage.
9. You have a one year parts and labor warranty on your new Griddle; keep it valid. Your Griddle was designed to prepare
food; dont abuse it by using it for any other purpose.
Controls & Indicators
Power Button
Temperature
Light
Temperature Control Dial
OFF
Position
Turn dial
clockwise
to set temperature.
Power Button
When the power button on the front of the
Griddle is depressed, (
1
), the Griddle is heating and in a
cooking mode. When the button is not depressed, (
0
), there
will not be any heat going to the Griddle.
Temperature Light
When the light is on, the Griddle
is generating heat. When the light goes off, the set
temperature has been reached.
You will notice the light cycling on and off during the
cooking process. When the light is on, the Griddle is
sending more heat to the grilling surface. When it is off,
the grill has been heated to the set temperature.
Temperature Control Dial
Turn the
dial
clockwise
to set the desired grilling
temperature. The Griddle temperature
range is 250ºF - 700ºF.
F
C
149
300
204
400
260
500
316 600
371
700
Scraper
Temperature Dial
- can be set for
temperatures between 250
0
and 700
0
F.
Temperature Light
indicates the elements
are heating up. Light
goes out when set
temperature is attained.
Power Button
-
Button up
indicates unit is
OFF
.
Button down
indicates unit is
ON
.
Drip tray
(tray slides out
from front of unit) -
slide tray out to empty when
unit is cooled, to avoid burns
Drain Hole to Drip Tray
Glass-Ceramic griddle surface
Drip Channel
3
If Trouble Occurs
If there is any unusual change in the operation of your Griddle, turn it off and disconnect the power immediately. Have a
qualified electrician perform any necessary repairs before using the Griddle again. If there are any cracks in the ceramic
glass top do not use the Griddle.
Cleaning Instructions
Cooking Residues
1. It only takes a few seconds to keep your Griddle clean while you are grilling. Simply wipe the grilling surfaces with a clean
paper towel between sandwiches. (Be sure to use a hot mitt or potholder!)
2. During operation, the Griddle may be also be Quick Cleaned with the scraper
*
provided with the unit. The scraped
residue may be pushed into the metal
drip tray
under the griddle surface through the opening in the Drip Channel at the
front of the Griddle.
Be sure to empty the drip tray regularly to avoid spills. For safety, let the unit cool before
attempting to empty drip tray.
3.
*
To avoid damaging the glass-ceramic cooking surface when cleaning, always use a scraper with rounded blade edges,
and
be sure the blade is in contact with the grilling surface along the entire length of the blade.
Do not use the corner
of the scraper because this causes scoring on the grilling surface, irreparably compromising functionality and cleanability.
Replace the scraper blade when it is no longer very sharp.
For more thorough cleaning
1.
Turn the unit OFF with the Power Switch and unplug the unit from power source before proceeding.
2. For hard to clean spots use the scraper
*
(see 3. above).
3. There are many nonabrasive cleaners specifically made for ceramic cooking tops on the market today. We suggest using
your choice of nonabrasive cleaner at the end of each day or service period to keep your Griddlel in top condition.
4.
Never use a spray of water or immerse the Griddle in water.
This will damage the electrical components and might
create a hazardous condition. It will also void your warranty.
