CADDX 8600, Manual

2

THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND
BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY SYSTEM
SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET.
FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING
PROPERLY.  THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE
LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND ANY PART OF THIS
MANUAL, YOU SHOULD NOTIFY YOUR INSTALLING COMPANY AND ASK FOR THAT
SECTION OF THE MANUAL TO BE EXPLAINED FULLY.

The SECURITY CONTROL CENTER is turned on (ARMED) and off (DISARMED) by entering
a 4 digit code into the Keypad Control, which is similar to a telephone keypad.  The Keypad
Control includes 10 indicator lights and a built-in electronic sounder.  These provide specific
information relating to the status of the security system which is described in this booklet. 
Understanding what the lights and sounds mean will help you easily operate your system.

SO REMEMBER, READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE
KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS AT YOUR BUILDING. IF
YOU HAVE ANY QUESTIONS, ASK YOUR INSTALLING COMPANY.

PLEASE KEEP IN MIND THAT THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS
SYSTEM RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:

  1.

The quantity, quality, and placement of security devices  attached to this system.

 
  2.  The knowledge you have of the security system and how that knowledge is utilized in a

weekly test of the complete system.

YOU SHOULD BE AWARE OF THE FOLLOWING FACTS AND USE THEM WHEN PREPARING
A SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.

!

  Your security system is an electronic device and is subject to failure or malfunction. Do not

rely on it as your single source of security.

!

  Your system should be tested weekly.

!

  Your system will not work without power.

!

  Warning devices will need to be loud enough, wired correctly, and properly placed  to  

provide notification of an alarm event.

!

  Smoke and heat detectors may not detect heat and smoke in all situations.

!

  Use qualified security professionals to select, install, and  maintain your security system.

!

It may be possible to arm the security system without the backup battery connected. Your
periodic test should be done with A.C. Power removed to verify the battery is connected
and adequately charged.

!

  Care should be taken to plug in and properly restrain the A.C. Transformer after testing.

PLEASE READ THIS ENTIRE BOOKLET CAREFULLY BEFORE OPERATING YOUR SECURITY
CONTROL SYSTEM. IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF
YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY
LISTED ON PAGE 1 OF THIS BOOKLET.