8
Ready 12345678
Armed 1234-678
System Ready
Type code to arm
12-45-78 Disarm
--3 67- Arm
12-4- -78 Disarm
- - 3-56- - Arm
DISPLAYS IN THE PARTITIONING MASTER MODE
Armed and Ready Status
The LCD screen will display the Armed and Ready status of ALL eight (8) partitions if any or all of the areas is armed
or not ready.
This display is reflecting all 8 areas are Ready, and Area 5 is disarmed.
NOTE: If a number is flashing on the armed line, that area is armed Instant. If
a number is flashing on the ready line, that area is ready to be Force Armed.
If ALL areas are disarmed and ready to arm, this display will appear on the LCD
screen.
Arming and Disarming Multiple Partitions
To arm/disarm multiple partitions, enter a code that has arm/disarm authority for ALL of the partitions to be
armed/disarmed. The following display will appear on the LCD screen.
The numbers on the top line represent the disarmed areas to which this code has
access. The numbers on the bottom line represent the areas that are armed.
Refer to the following table for possible conditions.
LCD DISPLAY FOR AREA
TOP LINE OVER BOTTOM LINE
CONDITION
Blank
Blank
Area Not Used or Authorized
Dash (-)
Dash (-)
Area Not Ready
Flashing
Dash (-)
Area Ready to Force Arm
Dash (-)
Flashing
Area Armed Instant
Area #
Dash (-)
Area Disarmed & Ready to Arm
Dash (-)
Area #
Area is Armed
To disarm all of the areas, press the [
x
] up scroll key.
To arm all of the areas, press the down scroll [
y
] key.
To toggle a single area between the armed and disarmed conditions, press [
U
] [Area number]. For example,
if Area 4 is armed, [
U
] [4] will disarm Area 4. If Area 4 is disarmed, [
U
] [4] will arm it.
To control the individual areas, refer to the following section “Operating Individual Areas in the Multi-Partition
Mode”.
Operating Individual Areas in the Multi-Partition Mode
Enter a code that is a valid arm/disarm code for the area you wish to operate. The following display will appear:
Only the areas authorized by this code will appear.
To toggle between the armed and disarmed states on an individual area, press [
U
] [Area Number].
To operate an individual area, enter the number of the partition you wish to operate. The LCD keypad will now
operate as a single area keypad. All keys and functions entered will affect this individual partition only. The
lights and LCD display represent the status of that partition only. The word "System" will be replaced with the
word "Area #". The following is an example of this feature.
To exit this screen, press [#].
