20
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad and may sound for any of the following
reasons:
T
Beeps for all keypresses.
T
Sounds a continuous tone during the Entry delay time.
T
Pulses when a day zone is violated while the system is disarmed.
T
Pulses when a FIRE zone has a trouble condition.
T
Pulses when the armed status changes and the AC power is off.
T
Beeps 3 times for trying to arm with the “READY” light off, if “FORCE
ARMING” has not been selected.
T
Beeps 1 second for the ‘CHIME” feature.
T
Beeps 1 second at the end of the exit delay.
T
Beeps to indicate telephone line fault if selected.
T
Beeps rapidly to alert you that there are only ten seconds remaining
in the exit delay.
When pulsing, the keypad sounder may be silenced by entering a valid code.
The arm/disarm state of your system will not change when entering a code to
silence a pulsing keypad sounder.
