9
If you do not know the number of the zone you wish to bypass,
use the following steps:
Step 1
Press
U
x
The description for zone 1 will be displayed.
Step 2
Use the
x
y
scroll keys to browse through the custom descriptions
for the zones in this system.
Step 3
To bypass or unbypass a specific zone, press the [BYPASS] key while
that zone is displayed.
Step 4
When finished, press the # key to return to the code entry screen.
GROUP BYPASS
By pressing the [BYPASS] key, followed by the 0 key, then the [BYPASS] key
again, all zones that are designated as group bypass zones will be bypassed.
Press the [BYPASS] key again to exit group bypassing.
UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone that is
already bypassed. NOTE: All zones will automatically be unbypassed each time
the system is disarmed.
EMERGENCY ACTIVATION KEYS
NOTE: You must press and hold these keys for 2 seconds to activate these
functions. Your system may not be programmed for these activations.
Fire Key - If programmed, you can activate the Fire alarm by pressing the
Emergency Activation [Fire] key for two seconds. If your system is connected to
a monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by fire
department personnel.
Procedure #2
