12
LOCATION 090-091: PROGRAMMING FOR AUXILIARY 2, [4] & [6] DOUBLE KEYPRESS
The Ranger 8980 has the ability to report an Auxiliary 2 code and activate the pulsing buzzer each time the [4] and [6]
keys are pressed simultaneously on the keypad. The desired Auxiliary 2 code is programmed in locations 090-091. If
both locations are "0", the Auxiliary 2 double keypress is disabled. Location 090 contains the standard digit, and
location 091 contains the extended digit. When using 4+2 format, the number programmed in location 090 is sent as
the "ones" digit. The "tens" digit is programmed in location 091. If activated, the keypad sounder can be silenced by
entering any Arm/Disarm code.
LOCATION 092-093: PROGRAMMING FOR KEYPAD PANIC, [*] & [#] DOUBLE KEYPRESS
The Ranger 8980 has the ability to report a Keypad panic code and activate the Burg siren each time the [r] and [#]
keys are pressed simultaneously on the keypad. The desired Keypad panic code is programmed in locations 092-093.
If both locations are "0", the Keypad panic double keypress is disabled. Location 092 contains the standard digit, and
location 093 contains the extended digit. When using 4+2 format, the number programmed in location 092 is sent as
the "ones" digit. The "tens" digit is programmed in location 093. If activated, the siren can be silenced by entering any
Arm/Disarm code.
LOCATION 094-095: PROGRAMMING THE TAMPER FEATURE
The Ranger 8980 has an optional tamper feature that, when enabled, will lock out the keypads for 1 minute if 30
random keypresses are made without producing a valid code. The desired tamper code should be programmed in
locations 094-095. If the control is not programmed for local only, the tamper will be communicated. If both locations
are "0", the tamper feature will not be enabled or reported. Location 094 contains the standard digit, and location 095
contains the extended digit. When using 4+2 format, the number programmed in location 094 is sent as the "ones"
digit. The "tens" digit is programmed in location 095.
LOCATION 096-097: PROGRAMMING TO REPORT DOWNLOADING COMPLETE
Locations 096-097 contain the communicator report sent each time a download session has been completed. The
report will come in after a disconnect has been made from a downloading session. Location 096 contains the standard
communicator code, and location 097 contains the extended communicator code. When using a 4+2 format, the
number programmed in location 096 is sent as the "ones" digit. The number programmed in location 097 is sent as the
"tens" digit. When using an extended format, the extended report will be sent if location 097 contains a number other
than "0". If locations 096-097 are "0", this report is disabled.
LOCATION 098-099: PROGRAMMING FOR AUTOTEST REPORTS
The Ranger 8980 has the ability to send autotest reports at intervals from 1 to 15 days. Locations 098-099 contain the
communicator codes sent for autotest. Location 098 contains the standard communicator code, and location 099
contains the extended communicator code. When using a 4+2 format, the number programmed in location 098 is sent
as the "ones" digit. The number programmed in location 099 is sent as the "tens" digit. When using an extended
format, the extended report will be sent if location 099 contains a number other than "0". If locations 098-099 are "0",
autotest is disabled. (NOTE: WHEN USING AUTOTEST, LOCATIONS 152-166 MUST BE PROGRAMMED.)
LOCATION 100-101: RESERVED FOR FUTURE USE
LOCATION 102: PROGRAMMING TO REPORT CLOSINGS
The Ranger 8980 has the ability to report a closing code each time the control is armed. The desired closing code is
programmed in location 102. If this location contains a "0", closings will not be reported. When using 4+2 format, the
number programmed in this location is sent as the "tens" digit. The "ones" digit is automatically the man number.
When using the remote arming input, the man number is 1. When using a one button "Quick Arm" code the man
number is 1. The closing report will not be initiated until the end of the exit delay.
