16
LOCATION 138: NO ARMING WITH A ZONE BYPASSED
If a "1" is programmed in location 138, the Ranger 8980 will not arm with any zone bypassed. If programmed with a "0",
up to 7 of the 8 burglary zones can be bypassed, and the Ranger 8980 can still be armed. Program a A4" to disable
the chime feature.
LOCATION 139: PROGRAMMING THE QUICK ARM DIGIT
Location 139 contains the "Quick Arm" digit. To enable, program a digit (1-9) in this location. If the "Quick Arm" digit is
the same as the first digit of the Master code (user 1), the "Chime" feature will not function. The "Quick Arm" digit
cannot be the same as the first digit of the "Go To Program" code. Default is "0", disabled.
LOCATION 140: PRIORITY SIREN CUTOFF INHIBIT
If a "1" is programmed in location 140, a Priority zone type siren will sound continuously until an arm/disarm code is
entered. If this location contains a "0", the Priority zone type siren will shutdown after the amount of time programmed
in location 077 has elapsed. Programming in this location does not affect the burglary siren.
LOCATION 141: DOUBLE LINE EXTENDED ALARM REPORTING
If an extended format is selected in location 052, and a "1" is programmed in location 141, all reports will be double line
extended. If location 141 contains a "0", only non-alarm reports will be extended (restore, cancel, opening, closing,
bypass, and trouble). With this format, the central station will receive the report on two printed lines. The example
below shows a burglary report from zone 6 of account number 999. Zone 6 was programmed to report a 3.
LINE 1:
999 (ACCOUNT CODE)
3 (CODE)
LINE 2:
333 (ACCOUNT CODE)
6 (EXT CODE)
LOCATION 142: SIREN/BELL TEST FEATURE
Programming a "1" in location 142 will cause the siren/bell to come on each time the [1] and [7] keys are pressed
simultaneously. The siren/bell can be silenced with an arm/disarm code. The siren/bell test does not cause the
communicator to transmit a message.
LOCATION 143: RESETTABLE AUXILIARY POWER
Programming a "1" in location 143 will cause the 8980 (when in the disarmed state) to interrupt the smoke detector
power each time the [#] button is pressed. If this location contains a "0", the smoke detector power will reset only after
the [#] button is pressed when zone(s) designated as Priority zone types are on steady for alarm or blinking for trouble.
LOCATION 144: EUROPEAN PULSE DIAL RATIO
Programming a "1" in location 144 will change the pulse dialing make/break ratio and interdigit spacing to conform to
most European telecom standards.
