AUTO. SWITCH OFF/ ELECTRONIC SYSTEM
The trolley will be stopped when no any buttons are pressed on the
remote transmitter for duration of 2 minutes.
When the trolley has not been used by remote transmitter for over 8
minutes, the controller of
your trolley will automatically switch off, if
this happen, press
Brake
to continue.
The electronic system of this trolley is protected by a digital current
cut-off system. In case your trolley stops, you must turn the main
ON/OFF switch (on handle grip) to the OFF position, then switch to
ON position to continue.
When trolley stops by digital cut-off system, the green and red led
light (on handle grip) will flash intermittently.
IMPORTANT NOTICE
When operating from the handle grip, before you switch to ON
position, the potentiometer button must be turned back to “0” (zero)
position.
Always switch power off (press brake button on remote transmitter)
and keep potentiometer on “0” (zero) position (on handle grip) before
leaving your trolley or while unattended.
- 15 -
BUTTON (KEY) LOCK
To prevent accidentally pressing a button on transmitter and starting the
trolley moving, you can activate the button lock (key lock) on the remote
transmitter.
To use button lock, press
Align
twice within one second.
The red led light of main battery indicator will flash if any buttons are
pressed while the remote transmitter is locked.
To unlock, press
Brake
twice within one second.
GUIDE TO USE REMOTE TRANSMITTER
Your remote transmitter is designed to operate while you stand behind
the trolley. If you are standing in front of the trolley, you can flip the
remote transmitter 180
to aid in understanding your trolley moving
direction.
The trolley will stop when moving over the remote range and may not
operate smoothly by remote control.
- 16 -
