27
CRISTAL 9 - CRISTAL PLUS 9 - ICON PLUS 9 - AMARANTO 9 - LIFE 9 - STEEL 9 - ELANE 9
Fig. 71 - Fume conduit cleaning
• Remove the inspection lid of the T-union (see
Fig. 71
).
• Extract the ash which has accumulated in the inner.
• After cleaning repeat the operation in reverse order, checking the condition and efficiency of the gasket, and if necessary
replace it.
It is important to sealed the cap othrwise noxiuous fumes will propagate among the room.
7.3
FUME PASSAGES CLEANING
Clean the fume passages every year.
Fig. 72 - Remove the screws
Fig. 73 - Remove the inspection cap
• Open the door.
• Remove the 4 screws (see
Fig. 72
) and remove the inspection cap (see
Fig. 73
).
Fig. 74 - Clean with pipe cleaner
Fig. 75 - Vacuum out the ash
• Clean with a pipe cleaner and suction any ash accumulated inside (see
Fig. 74
and
Fig. 75
).
• After cleaning, repeat the operation in reverse making sure the gasket is intact and efficient: if necessary, provide for the
replacement with original spare parts.
