19
LUCE - ELLE - ARCO
• After 5 minutes from the beginning of the switch-off procedure.
8.15 SLEEP FUNCTION (MAIN MENU)
The sleep function is activated only when the boiler is switched on and allows to quickly set a time at which the product must
switch off.
To set the Sleep function act as follows:
• Enter MENU
• Scroll to SLEEP with the <> arrows
• Press Menu
• With the + - keys adjust the desired shutdown time.
The panel proposes a shutdown time of 10 minutes from the current time, adjustable with key 4 until the next day (I can therefore
delay the shutdown for up to a maximum of 23 hours and 50 minutes).
Fig. 20 - Sleep
If the SLEEP function is active with the TIMER active the first has priority over the latter, therefore the boiler will not switch off at
the time set on the timer but instead by the time established by the sleep function, even if later than the time set on the timer.
8.16 EASY SET FEATURE (SEE SECTION X SETTINGS MENU A PAG. 13)
Proper operation of a stove mainly depends on the flue it is connected to. Once it is connected, it is equally important to perform
proper adjustment of combustion parameters.
The Easy Set feature makes it possible to adjust combustion more easily, in the event that one should notice that the stove does
not properly burn the fuel.
In the “Settings” menu, under the heading Easy Set, there are 4 configurations, SET1-SET2-SET3-SET4.
Select the SET based on the type of installation.
Caution, before changing the stove’s programming :
• It is recommended to change the factory settings under the supervision of an authorised technician.
• Before installation, ensure the flue has been installed and certified by suitable personnel according to the legal provisions in
force.
Examples of available “Easy Set” configurations compared to «typical» installation of reference:
SET 0 :
Default parameters
SET 1 :
Vertical exhaust
SET 2 :
Concentric vertical exhaust (mainly used in France)
SET 3 :
Horizontal concentric wall exhaust (only used and permitted in France)
SET 4 :
Smoke fitting with horizontal section
Fig. 21 - Ensemble d'exemples