background image

5

LUCE   -  ELLE  -  ARCO 

 

 SAFETY REQUIREMENTS 

 

 

 

•  Installation, electrical connection, functional verification and maintenance must only be 

performed by qualified or authorised personnel.

•  Live electrical parts: disconnect the product from the 230V power supply before perfor-

ming any maintenance operation. Only power the product after completing assembly.

•  Special maintenance must only be performed by authorised and qualified personnel.

•  All local regulations, including those referring to national European standards, must be 

respected during appliance installation.

•  The manufacturer declines any responsibility in case of installation which are not in compliance 

with current regulations, in case of a wrong room ventilation system, in case of an electric connec-

tion which is not in compliance with regulations and in case of a wrong use of the appliance.

•  It is forbidden to install the stove in bedrooms, bathrooms and in rooms used for storing 

combustible materials and in one-room flats.

•  The installation in one-room flats is allowed if they are in sealed chamber.

•  In any case the stove must not be installed in rooms where it can get in touch with water or 

water splashes because this can cause burn hazards and short-circuit.

•  Please check that the floor has an adequate load capacity. If the existing one does not 

satisfy this requirement, appropriate measure should be provided (for example a plate for di-

stributing the load).

•  For safety fire regulations the distances  from flammable or sensible to heat objects (sofas, 

pieces of furniture, wooden covering, etc...) must be respected.

•  If there are highly flammable objects (curtains, fitted carpet, etc...), all these distances 

must be further increased with 1 meter.

•  If the floor is made of combustible material, we recommend using a protector made of in-

combustible material (steel, glass, etc.) that also protects the front part from any falling burnt 

particles during cleaning.

•  The electrical cable must not get in touch with the fume exhaust pipe and nor with every 

other part of the stove.

•  The user, or whoever is operating the product, must read and fully understand the contents 

of this installation and use guide before performing any operation. Errors or incorrect settings 

can cause hazardous conditions and/or poor operation.

•  The type of fuel to use is only the pellets.

•  Do not use the appliance as waste inceneretor.

•  Do not place laundry on the product to dry. Any clothes horses or similar objects must be 

kept at a safe distance from the product. Fire hazard.

•  It is forbidden to operate the product with the door open or the glass broken.

•  It is forbidden to modify the appliance without authorization. 

•  Do not use flammable liquids during the ignition (alcool, petrol, oil, etc...).

•  After a failed ignition the burning pot must be empty from the amassed pellets, before 

starting the stove up again.

•  The pellet hopper must always be closed with its own lid. 

•  Before of every intervention leave the fire completely extinguish till the cooling and always 

disconnect the plug from the electric socket.

•  This appliance can be used by children aged from 8 years and above and persons with re-

duced physical, sensory or mental capabilities or lack of experience and knowledge if they 

have been given supervision or instruction concerning use of the appliance in a safe way and 

understand the hazards involved. Children shall not play with the appliance. Cleaning and 

user maintenance shall not be made by children without supervision.

•  Packaging are not toys and could cause suffocation or strangulation and other health ha-

zards! People (childreen included) with reduced mobility, psycological deseases or without 

experience and knowledge must be kept away from packaging. The stove 

IS NOT 

a toy.

Summary of Contents for ARCO 7 T1 BI-FLUX





































Reviews: