GRACE3 - SPIRIT3 - MADISON - TABLA - ROXY - ATRIUM - SOLO 5
20
Fig. 44 - Screw removal 1
Fig. 45 - Screw removal 2
Fig. 46 - Faceplates removal
• Loosen the 3 screws that fix the frame to the structure (see
Fig. 47
).
• Loosen the 3 screws behind the stove (see
Fig. 48
) and remove the panel (see
Fig. 49
).
• To assemble proceed in reverse order.
Fig. 47 - Screw removal 3
Fig. 48 - Screw removal 4
Fig. 49 - Panel removal
5.8
UPPER EXHAUST GRACE
3
Proceed as follows to install the Grace
3
with the upper smoke exhaust:
• With the help of clamps, break the grid near the exhaust (see
Fig. 50
). There are precuts under the grid that facilitate its
removal.
• Once the passage is open, insert the d.80 mm pipe of the smoke exhaust (see
Fig. 51
).
Fig. 50 - Remove grid
Fig. 51 - Insert pipe
