Stufe a pellet
23
9.3
PELLET REFUELLING TIMER
This stove is equipped with a safety timer that activates after the pellet hopper door has been open for
90 seconds
during reloa-
ding (see
). After 90 seconds, the stove goes into "A05" depression alarm and proceeds to switch off.
Wait until it switches off, then light it again.
Fig. 26 - Door open
Fig. 27 - deteriorated gasket
Fig. 28 - Timer: 90 seconds
To operate correctly, the stove must work with the pellet hopper door always closed; should it remain open for
more than 90 seconds, the stove switches off.
• The loading system stops when the tank door is opened.
Before closing the lid, make sure there are no pellets below the gasket. Pellets deteriorate the gasket and
eliminate its airtight sealing. (vedi
10 VENTILATION
• The stove is endowed with a ventilation system.
• The air blown from fans keeps the appliance at a low temperature range in order to avoid high stresses to the materials which
make it up.
• Do not cover the hot air outlet slits with any object to avoid stove’s overheating!
• The stove is not suitable for food cooking.
Fig. 29 - Do not cover air slits
11 REMOTE CONTROL (OPTIONAL)
• The stove can be operated through a remote control (optional)
• Operation requires 1 CR 2025 (3Volt) Lithium battery
• Operating temperature 0 °C / 50 °C
• 38 khz infrared signal
Summary of Contents for Cristal 7 Up
Page 38: ...NOTE...
Page 39: ...NOTE...
