18
FAMILY
EN
PANEL ELEMENT
DESCRIPTION
Fume fan: active.
Exchanger fan: active.
-
Alarm: active.
Fig. 17 - LCD control display
LEGEND
1
Time
2
Power
3
State
4
Message
5
Temperature
12.3
USER MENU
By once pressing P3 key you can hace access to user parameter controlling. To let them slide press P5 and P6
keys. They are:
POS.
REFERENCE
DESCRIPTION
1
SET CLOCK
Set date and time. The board is provided with a lithium battery which enables a clock
autonomy of 3/5 years. See
.
2
SET CHRONO
Press once P3: "CHRONO ENABLE" appears. Press P3 again and with P1 and P2 put in "OFF"
or "ON". For daily, week-end or weekly programming, see
CAUTION: do not active if STAND-BY function is active!
3
SELECT
LANGUAGE
Press once P3 key and with P1 and P2 keys select the desired language.
4
STAND-BY MODE
It activates a function which, if the set ambient temperature has been exceeded for more
then 10 minutes, start the switching off phase up. If the ambient temperature has fall at
more than 2°C, the stove will restart automatically up, starting from
Press once P3 key and with P1 and P2 keys put in "OFF" or "ON". CAUTION: do not activate if
CHRONO function is active!
5
BUZZER MODE
(audio alarm)
Press once P3 key and with P1 and P2 keys put in "OFF" or "ON".
6
INITIAL LOAD
When the stove has its first ignition, the auger is completely empty. If it should be necessary
do a precharge by pressing P3 key, then P1 key for starting up and P4 key for stop.
7
STOVE STATE
It shows all parameters connected to the stove state: this is a menu for the Authorized
Techinician
8
TECHNICA SETTING
Only for the Authorized Technician.