IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
6
Special maintenance must only be done by authorised qualified personnel.
Assess the static conditions of the floor that will bear the weight of the product and provide for appropriate insulation in the event
it is made of flammable material (i.e. wood, carpet, plastic).
Live electrical parts: only power the product after having assembled it completely.
Disconnect the product from the 230V power supply before servicing it in any way.
SHOULD THERE BE SMOKE IN THE ROOM OR AN EXPLOSION IN THE APPLIANCE, SWITCH IT OFF, AIR OUT THE ROOM, AND
IMMEDIATELY CONTACT THE INSTALLATION/CUSTOMER SERVICE TECHNICIAN.
2.2
INFORMATION
• If you have any issues, contact the retailer or a qualified technician authorised by Cadel; if repairs are required, ask them to use
original spare parts.
• Only use the type of fuel recommended by Cadel (in Italy, 6mm-diameter pellets and in other European countries, 6-8mm-
diameter pellets), which must be loaded solely via an automatic feed system.
• Periodically check and clean the smoke exhaust duct (connection to the flue).
• The unburnt pellets that accumulate in the burner after several failed ignitions must be removed before attempting another ignition.
• A pellet stove is not a cooking appliance.
• Always keep the fuel hopper cover closed.
• Keep this instructions manual, which is an essential part of the stove, for its entire service life. If you sell or transfer the stove
to another user, always make sure the booklet goes with the product.
• If lost, contact Cadel or the authorised retailer for another copy.
• Based on EU regulation no. 305/2011, the “Declaration of Performance” is available online at :
www.cadelsrl.com / www.free-point.it.
2.3
INTENDED USE
The product only works with wood pellets and must be installed indoors.
2.4
WARRANTY CONDITIONS
The company guarantees the product,
with the exception of the elements subject to normal wear
listed below, for a dura-
tion of
2 (two) years
from the date of purchase, which is demonstrated by:
• a supporting document (invoice and/or receipt) showing the name of the retailer and the date of sale;
• the forwarded warranty certificate, filled out within 8 days of the purchase.
Furthermore, in order to make the warranty valid and operative, the appliance must have been installed and commissioned solely
by qualified personnel, who, when necessary, must issue the user a declaration of conformity of the system and a declaration of
proper product operation.
We recommend running a functional test of the product before completing the finishes (upholstery, painting the walls, etc.).
Installations that do not follow the standards in force invalidate the product warranty, as do improper use and failure to service as
required by the manufacturer.
The warranty is operative as long as you follow the instructions and the warnings contained in the use and maintenance manual
accompanying the appliance, so as to use it properly.
Replacing the entire appliance or repairing one of its components does not extend the duration of the warranty, which remains
unchanged.
Warranty is intended as replacing or repairing
parts recognised as being flawed due to manufacturing defects, free of
charge
.
To use the warranty in the event of a defect, the purchaser must keep the warranty certificate and present it along with the docu-
ment issued at the time of purchase at the Customer Service Centre.
Malfunctions and/or damage to the appliance as a result of the following causes are excluded from this warranty:
• Damage due to transport and/or handling.
• All parts that are defective due to negligence or carelessness during use, improper maintenance, installation not in compliance
with the manufacturer’s specifications (always refer to the installation and operating manual supplied with the appliance).
• Improper sizing with respect to use or installation defects, that is, failure to take the necessary precautions to ensure the work
is done properly.
• Inappropriate appliance overheating, that is, using fuels that do not comply with the types and amounts indicated in the
