IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
28
DESCRIZIONE
IDROPRINCE 30
IDROPRINCE 30 H2O
Effective rated power
28,62 kW (19.608 kcal/h)
28,62 kW (19.608 kcal/h)
Effective rated power (H
2
O)
26,99 kW (16.082 kcal/h)
26,99 kW (16.082 kcal/h)
Minimum effective power
7,76 kW (4.042 kcal/h)
7,76 kW (4.042 kcal/h)
Minimum effective power (H
2
O)
6,28 kW (2.666 kcal/h)
6,28 kW (2.666 kcal/h)
Performance at Max
93,68%
93,68%
Performance at Min
94,79%
94,79%
Exhaust smoke temperature at Max
88,7°C
88,7°C
Exhaust smoke temperature at Min
56,8°C
56,8°C
Particulate / OGC / Nox (13%O
2
)
17,2 mg/Nm
3
– 0,9 mg/Nm
3
– 82,1 mg/Nm
3
17,2 mg/Nm
3
– 0,9 mg/Nm
3
– 82,1 mg/Nm
3
CO at 13% O
2
at Min and at Max
0,018 — 0,008%
0,018 — 0,008%
CO
2
at Min and at Max
4,71% – 8,05%
4,71% – 8,05%
Smoke mass
25,2 g/sec
25,2 g/sec
Maximum operating pressure
2,5 bar – 250 kPa
2,5 bar – 250 kPa
Recommended draft at Max*** power
0,10 mbar – 10 Pa***
0,10 mbar – 10 Pa***
Minimum draft permitted at Min power 0,02 mbar – 2 Pa
0,02 mbar – 2 Pa
Hopper capacity
72 litri
72 litri
Type of pellet fuel
Ø 6 mm 3÷40 mm
Ø 6 mm 3÷40 mm
Hourly pellet consumption (min ~ max) 1,7 kg/h * ~ 6,33 kg/h *
1,7 kg/h * ~ 6,33 kg/h *
Range (min ~ max)
28 h * ~ 7 h *
28 h * ~ 7 h *
Heatable volume m
3
613/40 – 700/35 – 817/30 ** 613/40 – 700/35 – 817/30 **
Air intake for combustion
Ø 80 mm
Ø 80 mm
Smoke outlet
Ø 100 mm
Ø 100 mm
Air vent
100 cm
2
100 cm
2
Rated electrical power (EN 60335-1)
92W (max 380W)
92W (max 380W)
Power supply voltage and frequency
230 Volt / 50 Hz
230 Volt / 50 Hz
Net weight
265 kg
265 kg
Weight with packaging
287 kg
287 kg
Distance from combustible material
(back/side/bottom)
150 / 200 / 0 mm
150 / 200 / 0 mm
Distance from combustible material
(ceiling/front)
750 / 1000 mm
750 / 1000 mm
* Values that can vary depending on the type of pellet used
** Heatable volume depending on the power required per m
3
(respectively, 40-35-30 Kcal/h per m
3
)
*** Value recommended by the manufacturer (not binding) for optimal product performance
Tested according to EN 14785 in compliance with the European Construction Product regulation (EU 305/2011)
