IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
31
• Secure the frame to the lower part of the stove (see
).
• Fit the lower door by putting the pins into the specific holes (see
• Turn the door and close it (see
5.3
ASSEMBLING AQUOS SIDE PANELS
3
16-23-23 H
2
O
To assemble the side panels, proceed as follows:
Fig. 28 - Remove the cover
Fig. 29 - Remove the compensator
Fig. 30 - Put in the finish
• Unscrew the screws on the cover and remove it (see
• Remove the compensator from the side (see
).
• Put in the painted / ceramic / stone panels, sliding them down the guides (see
).
Fig. 31 - Bend the supports
Fig. 32 - Position the compensator
Fig. 33 - Fasten the compensator
• When you put in the finishes, bend the supports slightly to make up for any looseness in the metal/ceramic/stone panel. These
supports are grooved along the guides (see
• Reposition the compensator on the side (see
).
• Secure the compensator (see
) and reposition the cover with the screws.
5.4
ASSEMBLING THE IDRON 16-22 AIRTIGHT / HIDROFIRE 22.8 SIDE PANELS
To assemble the side panels, proceed as follows:
