IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
32
Fig. 34 - Remove the screws
Fig. 35 - Hook the side panel
• Unscrew the screws on the cover and remove it (see
• Hook the teeth of the side panels into their grooves (see
).
Fig. 36 - Secure the front side panel
Fig. 37 - Secure the rear side panel
• Secure the side panel on the front (see
• Secure the side panel on the back of the stove (see
).
• Reposition the cover with the screws.
6
LOADING PELLETS
6.1
LOADING PELLETS
Fuel is loaded from the top of the stove, lifting the door. Pour the pellets into the hopper.
To facilitate the procedure, do it two steps:
Pour half of the contents into the hopper and wait for the pellets to settle at the bottom.
Complete the operation by pouring in the second half.
If loading pellets while the stove is working, open the hopper door using the cool touch handle supplied with
the stove.
Do not allow the bag of pellets to come into contact with hot surfaces while loading.
