IDRO PRINCE
3
12-16-23-23 H
2
O - IDRO PRINCE 30-30 H
2
O - AQUOS
3
16-23-23 H
2
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
60
14 CLEANING AND MAINTENANCE
Fig. 60 - Example of a clean brazier
Fig. 61 - Example of a dirty brazier
Only appropriately servicing and cleaning the product can ensure its safety and proper operation.
ATTENTION!
All cleaning operations of all the parts must be done when the product is completely cold and with the elec-
trical plug disconnected.
Disconnect the product from the 230V power supply before servicing it in any way.
The product requires little maintenance if used with certified, high quality pellets.
14.1 DAILY OR WEEKLY CLEANING (USER’S RESPONSIBILITY)
Ash drawer cleaning
Press door “H” to the bottom right and open it. Turn the handle of door “G” to the right and open it downwards.
Pull out and empty ash drawer “D”. Remove any ash residue from the compartment before reinserting the drawer. Experience and
pellet quality will determine the frequency of the ash drawer cleaning. In any case, it is advisable not to exceed 2 or 3 days.
When cleaning the ash drawer, we recommend removing part “C” near the brazier and using a vacuum cleaner nozzle to remove
any ash build-up.
Fig. 62 - Drawer removal
Fig. 63 - Brazier removal
