21
WALL
3
PLUS - TILE
3
PLUS - MOON - LEAN
3
PLUS
5.9
PANEL ASSEMBLY (MOON MODEL)
Assembly must be carried out by an authorised technician.
Proceed as follows to assemble the panel:
Fig. 34 - Slide the panel on
Fig. 35 - Secure the screws
• Slide the coloured panel on from the top, wedging the teeth into the specific slots (see
Fig. 34
).
• Secure the panel on the back with 4 screws (see
Fig. 35
).
5.10 PANEL ASSEMBLY (TILE
3
PLUS MODEL)
Assembly must be carried out by an authorised technician.
Proceed as follows to assemble the panel:
Fig. 36 - Disassembly of the upper bracket
Fig. 37 - Release of the lower bracket
Fig. 38 - Panels fixing
• Loosen 2 screws and remove the upper bracket.
• Unhook the upper and lower coating union brackets from the magnets.
• Compose the coating by fixing the 2 coloured panels to the 2 union brackets.
Summary of Contents for LEAN3 PLUS
Page 31: ...NOTE ...
