19
STUFE A PELLET
5.5
REMOVAL/ASSEMBLY OF THE FRAME (SWEET
3
7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT K AT)
To assemble the frame, proceed as follows:
• Push the frame upwards and release the teeth (see
Fig. 27
).
• Remove the frame (see
Fig. 28
).
• To assemble the frame, proceed in reverse order.
Fig. 27 - Release the frame
Fig. 28 - Remove the frame
5.6
REMOVAL/ASSEMBLY OF SIDE PANELS (SWEET
3
7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT K AT)
To disassemble the side panels, proceed as follows:
• Undo the rear screws (see
Fig. 29
).
• Open the side panel (see
Fig. 30
) and release the fastening teeth (see
Fig. 31
).
• To assemble, proceed in reverse order.
Fig. 29 - Remove the screws
Fig. 30 - Release the side panels
Fig. 31 - Fastening teeth
5.7
REMOVAL/ASSEMBLY OF SIDE PANELS (CRISTAL
3
7.0 - LORD 7.0)
To disassemble the side panels, proceed as follows:
• Undo the front screws (see
Fig. 32
).
• Open the side panel (see
Fig. 33
) and release the rear teeth (see
Fig. 34
).
• To assemble, proceed in reverse order.
Summary of Contents for LORD 7
Page 39: ...NOTE ...