33
MARTINA - VANESSA - ALESSIA - SOLARIS
EN
PROBLEM
CAUSE
SOLUTION
INTERVENTION
Fire
extinguishes
and stove stalls
Empty hopper
Full the hopper.
Auger blocked by a
foreign object (for
example nails)
Clean the auger.
Poor quality pellet
Try with other types of pellets.
Pellet loading value too
law “phase 1”
Adjust pellet load.
Check if there is an
active alarm “ALAR
DEP”, “ALAR SIC”)
Have the stove overhauled.
Running stove
and display
showing “STOP
FIRE”
Automatic burning pot
cleaning
At idling stove and at maximum fume suction NO
PROBLEM!
Flames are
weak and
orange, pellets
do not burn
properly and
the glass
blackens
Insufficient combustion
air
Check the following inscription: probable obstructions
for combustion air inlet from the stove back or bottom;
obstructed holes of the burning pot grid and/or burning
pot with too ash. Have the fun blades and its screw
cleaned.
Obstructed exhaust
The exhaust chimney is partly or fully obstructed.
Contact an expert stove-repairer to check the exhaust
up to the chimney pot. Please clean it immediately.
Obstructed stove
Clean the stove inner.
Fume aspirator out of
order
Pellet can burn also thank to chimney flue depression
without the aid of the fume fan. Have the fume fan
replaced immediately. It can be harmful to health to
run the stove without fume fan.
Heat
exchanger fan
keeps turning
even when
the stove has
cooled
Faulty fume temperature
probe
Replace the fume probe.
Faulty electronic board
Replace the mother board.
