21
WOOD COOKING STOVES
EN
•
Extract the plug from the socket.
•
Extract the wood tray completely. Lift it slightly up and extract it.
•
Unscrew the 4 screw placed at the sides of the fan protection carter (see
•
Disconnect the faston and unscrew the screw of faulty fan.
•
Replace the fan and repeat the opposite operation.
12.13
SWITCH REPLACEMENT
For switch replacement proceed as follow:
•
Remove the plug from the socket.
•
Disconnect the switch faston (see
) and after having replaced it, repeate the opposite
operation.
12.14
GASKET REPLACEMENT
In case of deterioration of fire door gaskets and oven door gaskets it is necessary to replace them by an autorized
technician in order to guarantee the good running of the stove.
12.15
OVEN LIGHT REPLACEMENT
Some stove models are endowed with on oven light. In case of break proceed as follow:
•
Remove the plug from the socket.
•
Unbolt the glass protection.
•
Remove the lamp and replace it with another with the same features (15W 240V 300°C).
•
Reassemble all.
Once the protection is unbolted, if necessary remove the external cooking fume remains and carefully dry it
before bolting it again.
For an efficient oven light it is necessary to execute a periodical light protection cleaning.
12.16
HEART BREAK
Probable cast iron or refractory heart break are due to an excessive overheating caused by too much fuel or
by too much combustion air. Have the damaged elements immediately replaced in order to avoid feather
damages to the stove.
Fig. 18 -
Unscrew the profile
Fig. 19 -
Remove the profile
Fig. 20 - Remove the refractory material
•
Undo the screw of the profile that locks the refractory material in place (see
).
•
Remove the steel profile (see
•
Remove the broken refractory material and replace it (see
).
Use exclusively original spare parts.
Summary of Contents for MINI
Page 51: ...NOTE...