KOBE-FENICE-SPARK-INDACO-PRINCE
2
SUMMARY
1 MANUAL SIMBOLOGY ....................................3
2 PACKAGING AND HANDLING ..........................3
2.1 PACKAGING .............................................................3
2.2 REMOVING THE STOVE FROM THE PALLET ..............3
2.3 STOVE HANDLING....................................................4
3 CHIMNEY FLUE .............................................4
3.1 PREPARING THE SMOKE EXPULSION SYSTEM .........4
3.2 CHIMNEY COMPONENTS .........................................4
3.3 SMOKE DUCT (SMOKE FITTING) ..............................5
3.4 FLUE (CHIMNEY OR PIPED DUCT) ...........................5
3.5 CHIMNEY POT ..........................................................6
3.6 MAINTENANCE ........................................................7
4 COMBUSTION AIR .........................................7
4.1 AIR INLET ................................................................7
4.2 COMBUSTIBLE AIR INLET FOR SEALED-CHAMBER
INSTALLATION ...................................................................8
5 EXAMPLES OF INSTALLATION (DIAMETERS AND
LENGTHS TO BE SIZED) ........................................9
6 INSTALLATION ............................................10
6.1 INTRODUCTION .....................................................10
6.2 MINIMUM DISTANCES ...........................................11
6.3 OVERALL DIMENSIONS .........................................12
6.4 STOVE DOOR REMOVAL/INSTALLATION ................14
6.5 REMOVAL/ASSEMBLY OF SIDE PANELS (PRINCE 11 -
PRINCE PLUS 11) ..............................................................14
6.6 REMOVAL/ASSEMBLY OF THE FRAME (PRINCE 11 -
PRINCE PLUS 11) ..............................................................15
6.7 REMOVAL/ASSEMBLY OF SIDE PANELS (FENICE 11 -
FENICE PLUS 11) ..............................................................15
6.8 REMOVAL/ASSEMBLY OF LOWER FRONT PANEL
(FENICE 11 - FENICE PLUS 11) .........................................16
6.9 REMOVAL/ASSEMBLY OF SIDE PANELS (KOBE 11 -
KOBE PLUS 11) .................................................................16
6.10 REMOVAL/ASSEMBLY OF THE FRAME (KOBE 11 - KOBE
PLUS 11) ..........................................................................17
6.11 1.2 REMOVAL/ASSEMBLY OF SIDE PANELS (INDACO
11) ..............................................................................17
6.12 1 REMOVAL/ASSEMBLY OF SIDE PANELS (SPARK 11)
..............................................................................18
6.13 REAR OR UPPER FUME EXHAUST ..........................19
6.14 CONCENTRIC PIPE-KIT ASSEMBLY .........................20
6.15 HOT HAIR DUCTING (ONLY VALID FOR DUCTED
STOVES) ...........................................................................21
6.15.1 DUCTING SOLUTIONS: .........................................21
6.16 DUCTING DATA ......................................................23
6.17 ELECTRIC CONNECTION .........................................23
6.18 CONNECTION TO THE EXTERNAL THERMOSTAT .....24
6.19
STOVE CALIBRATION AND DEPRESSION
MEASUREMENT ...............................................................24
7 SPECIAL MAINTENANCE ..............................25
7.1 INTRODUCTION .....................................................25
7.2 FUME CHAMBER CLEANING ..................................25
7.3 FUME CONDUIT CLEANING ....................................26
7.4 FUME PASSAGE CLEANING ....................................27
7.5 FUME FAN CLEANING ............................................28
7.6 ROOM FAN CLEANING ...........................................28
8 IN CASE OF ANOMALY ..................................29
8.1 PROBLEM SOLVING ...............................................29
9 TECHNICAL DATAS ......................................32
9.1 REPAIR INFORMATION ..........................................32
10 FEATURES ..................................................33
