RIVER IDROTECH 18 - 24 - 24H2O
3
1
MANUAL SIMBOLOGY
USER
AUTHORISED TECHNICIAN
(ONLY to interpret or the Stove-manufacturer or the Authorized Technician of
Technical Assistance Service approved by the Stove-manufacturer)
SPECIALIZED STOVE-REPAIRER
CAUTION:
READ CAREFULLY THE NOTE
CAUTION:
DANGER OR IRREVERSIBLE DAMAGE POSSIBILITY
• The icons with the stylized figures indicates whom the subject dealt in the paragraph is addressed to (between the User and/
or the Authorized Technician and/or the Specialized Stove-repairer).
• WARNING symbols indicates an important note.
2
PACKAGING AND HANDLING
2.1
PACKAGING
• The packaging is made up of recyclable cardboard boxes according to RESY standards, recyclable expanded polystyrene inserts
and wooden pallets.
• All packaging materials can be re-used for a similar use or eventually discharged as waste assimilable to the municipal solid
ones, in accordance with current regulations.
• After having removed the packaging please assure you about the integrity of the product.
2.2
PREPARATION AND UNPACKING
The product is packaged in a recyclable cardboard box according to RESY standards, on a wood pallet. All the packaging materials can
be reused for similar purposes or, in the event, disposed of as waste assimilable to urban solid waste, following the standards in force.
After having removed the packaging, make sure the product is intact.
Handle the product with appropriate means, respecting the safety standards in force. Do not overturn the
packaging and use caution for the ceramic details.
The stoves are delivered in a single package with ceramic panels or steel sides packaged along with the structure and positioned
either on top or to the side. Open the packaging, remove the cardboard and any supporting polystyrene and place the stove in the
selected location, making sure it complies with the requirements.
The stove body or single unit must always be handled upright exclusively using hand trucks. Be especially careful to protect the
door and its glass from mechanical impacts that would compromise their integrity.
If possible, unpack the stove near the area in which it will be installed.
The packaging materials are neither toxic nor harmful.
To take the stove off the pallet, remove the two “U” screws and slide the “S” plate out from the stove foot. There are four “S” brackets
(see below).
