new RIVER IDRO T2 - TESIS Airtight T2 - MIRA T2 - MAYA idroT2
21
The main quality certifications for pellets currently available on the European market guarantee that the fuel complies with class
A1/A2 according to ISO 17225-2. These certifications include, for example, ENPlus, DINplus, Ö-Norm M7135, and specifically assure
that the following characteristics are complied with:
• calorific value: 4.6 - 5.3 kWh/kg.
• Water content: ≤ 10% of the weight.
• Percentage of ash: max 1.2% of the weight (A1 less than 0.7%).
• Diameter: 6±1/8±1 mm.
• Length: 3-40 mm.
• Content: 100% untreated wood without the addition of binding agents.
The company recommends using certified fuel for its products (ENPlus A1, DINplus, Ö-Norm
M7135).
The use of pellets that do not comply with the characteristics specified previously may com-
promise the operation of your product and therefore invalidate the warranty and product
liability.
9.2
PELLET SUPPLY
Fig. 13 - Wrong opening of the pellets bag
Fig. 14 - Right opening of the pellets bag
It is necessary to avoid to fill the hopper with the pellet when the stove is running.
• Do not get the bag of pellet in contact with hot stove surfaces.
• Do not empty the hopper with remaining fuels (unburnt pellet) from the burning pot coming from ignition waster.
10 SAFETY DEVICES AND ALARMS
The product is supplied with the following safety devices
10.1 PRESSURE SWITCH
• It controls pressure in the fume duct. It blocks the pellet feed screw in the following instances:
• clogged exhaust
• Significant negative (wind)
• clogged fume passages
• open pellet loading tank
• open fire door or worn/broken gaskets.
• see SMOKE RPM VARIATION User Manual
10.2 SMOKE TEMPERATURE PROBE
Detects the temperature of the smoke, thereby enabling start-up or stopping the product when the temperature drops below the
preset value.
10.3 CONTACT THERMOSTAT IN THE FUEL HOPPER
If the temperature exceeds the preset safety level, it immediately shuts down boiler operation.
