11
UTENTE WALL3 PLUS_TILE3 PLUS_ MOON_LEAN3 PLUS_EN
To select “Screw loading” (only when the boiler is switched off) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Screw loading” using the arrows.
• Press “menu” to confirm.
• Select “Enabled” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
d - Tone
This function is disabled by default, so to enable act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Tone” using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
e - Ext.Thermostat (see relative chapter)
f - Auto-Eco activation
To select the Auto-Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Auto-Eco activation" using the arrows.
• Press “menu” to confirm.
• Select “On” with the + - keys.
• Press “menu” to confirm and “esc” to exit.
g - Off Time Eco
To select the Off Time Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Off Time Eco” using the arrows.
• Press “menu” to confirm.
• Enter the minutes with the + - keys.
• Press “menu” to confirm and “esc” to exit.
h - Pellet Recipe
To change the recipe act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Pellet Recipe” using the arrows.
• Press “menu” to confirm.
• Modify the % with the + - keys.
• Press “menu” to confirm and “esc” to exit
i - Smoke Fan rpm
To change the parameter act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to confirm.
• Scroll to “Smoke Fan rpm” using the arrows.
• Press “menu” to confirm.
