Cadel TILE3 MOON, User Manual

UTENTE WALL3 PLUS_TILE3 PLUS_ MOON_LEAN3 PLUS_EN

14

Fig. 12 - Display

Note: The full stop to the right of the ambient temperature shown in the control panel display (upper right) indicates the half 

degree (e.g. 23.° means 23.5°C).

Air Fan Speed 1 - 

this function allows selecting the desired speed for the ambient fans from 1 to 5 or A. A means automatic, 

ventilation depends on power, recommended setting (see 

Fig. 13

).

Air Fan Speed 2

 - this function allows selecting the desired speed for the DUCTING fans from 1 to 5 or A. A means automatic, 

ventilation depends on power, recommended setting (see 

Fig. 14

).

Fig. 13 - Display

Fig. 14 - Display

With function “1” or "2" or "3" or "4" or "5" the fan is forced to work at the selected output. (For example: by setting “3”, even if the 

fan is set to heat output 5 it will work as if set to heat output “3”, etc.).

If the stove is set to maximum heat output 5 and the fans to minimum output 1, this may cause overheating 

and the “THERMAL SAFETY” alarm to go off.

Comfort Mode -

 this function allows activating - deactivating the fans at

 power 1

.

Fire

 - this function allows setting the flame power from a minimum of 1 to a maximum of 5. The power levels correspond to a 

different fuel consumption value: by setting 5 you can heat the room in less time, while by setting 1 you can keep the ambient 

temperature constant for a longer period. The flame set goes to the minimum value automatically when the set temperature value 

is reached.

If only one notch appears, the stove has a flame power equal to 1.

If 5 notches appear, the stove has a flame power equal to 5.

If the notches flash, automatic cleaning is under way.

Fig. 15 - Display

Fig. 16 - Power levels

9.12  PROGRAMMED MODE (TIMER) - MAIN MENU

Setting the current day and time is essential for the proper operation of the timer.

There are six TIMER programmes, for each one the user can decide the start-up and shutdown time as well as the day of the week