23
UTENTE WALL3 PLUS_TILE3 PLUS_ MOON_LEAN3 PLUS_EN
Fig. 34 - Hopper and auger cleaning
12.4 FUME CHAMBER CLEANING
Every season (or every 1500 operation hours) the fume chamber and the fume passages cleaning must be executed.
• Remove the left front panel, see .
Fig. 35 - Heat protection panel removing
Fig. 36 - Inspection panel removing
• Unscrew the 2 screws from the galvanised panel (see
• Remove the inspection panel (see
).
Fig. 37 - Cleaning with a brush
Fig. 38 - Fume chamber cleaning
• Clean the 2 internal fume passages with a brush (see
• Clean with a vacuum cleaner the ash which has accumulated on the inner (see
• After the cleaning the opposite operation is to repeat checking the gasket efficiency and integrity: if necessary provide for its
replacement by an Authorized Technician.
