Cadel TILE3 MOON, User Manual

UTENTE WALL3 PLUS_TILE3 PLUS_ MOON_LEAN3 PLUS_EN

22

•  It is also necessary to have the combustion chamber, motors and fans cleaned and to have the gaskets and the electronical 

elements checked at least once a year.   

All these operations must be planned in time with your Autorized Technical Assistance Service. 

•  After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust. 

•  If the stove had been using continuously and intensely, the whole system (chimney included), must be cleaned and checked 

more frequently. 

•  In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.

12.2  BURNING POT AND ASH TRAY CLEANING

The burning pot and ash tray cleaning must be executed at least every 2 days.

•  Open the door.

Fig. 28 - Burning pot extraction

Fig. 29 - Burning pot cleaning

Fig. 30 - Burning pot cleaning

•  Extract the busrning pot (see 

Fig. 28

 and 

Fig. 29

 ) from its seat and empty it from the ash.

•  If becessary clean with a pointed object the holes obstructed by encrustations (see 

Fig. 30

).

Fig. 31 - Ash tray box cleaning

Fig. 32 - Burning pot box cleaning

Fig. 33 - Cleaning with a brush

•  Clean and drain away the burning pot box and ash tray box from ash which has accumulated in its inner (see 

Fig.31

 and 

Fig.32

).

•  Clean also the hole for pellet drop with a brush (see 

Fig. 33

).

•  The ash remains must be poured in a metal container with a sealed lid and this container must never get in touch with combu-

stible materials (for example put on a wooden floor), as the inner ash keeps the embers firing for a long time.

•  Only when the embers are off the ash coul be poured in the organic waste.

•  Pay attention if the flame becomes red colured, if it is weak or if black smoke creates in the inner: in this case the burning pot 

is encrusted and needs to be cleaned. If it is broken, it must be replaced.

12.3  HOPPER AND AUGER CLEANING

Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper bottom. If present, they 

must be removed with the aid of a vacuum cleaner (see 

Fig. 34

 ).