19
ZEFIRO
3
- ZEN AIRTIGHT
efficient, please endow you with one in compliance with the law.
•
Connect the supply cable first on the back of the stove (see
Fig. 26
and
Fig. 27
) and then at a wall electric socket.
Fig. 26 - Electric socket with master switch
Fig. 27 - Plug connected
•
Do not use extension cables.
•
If the feeder cable is damaged, it must be replaced by an authorized technician.
•
When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.
6.12 AIR REGULATOR
The stove is fitted with a removable rear air regulator
The stove is regulated according to the flue data and pellet used, as per the technical features (see
FEATURES a pag. 34
)
If the data does not match, the authorised technician can increase the stove draft by removing/loosening the ring located inside
the air inlet pipe (see
Fig. 28
and
Fig. 29
).
Fig. 28 - Ring removal 1
Fig. 29 - Ring removal 2
Air regulator opening 35 mm for nominal power with flue 11 Pa.
6.13 INSERT LEGS INSTALLATION (OPTIONAL)
It is possible to install the insert on a support structure with height-adjustable legs.
To assemble the legs, proceed as follows:
•
Fix the leg reinforcement with the extension using the screws (see
Fig. 30
).
•
Compose the 4 legs and fix them with the screws (see
Fig. 31
).
•
Fix the insert support surface above the legs (see
Fig. 32
).
Fig. 30 - Assemble reinfor extension
Fig. 31 - Assemble legs
Fig. 32 - Assemble legs + surface
Summary of Contents for ZEFIRO3-ZEN AIRTIGHT
Page 35: ...NOTE ...