Doc150313-01
Installation and maintenance manual
www.cadexair.com
12
1010, Boulevard Lionel Boulet
1-800-461-0668
Varennes, Québec, Canada J3X 1P7
A lot of noise
from exhaust
hood
Exhaust fan problem
- Motor belts are damaged; change the motor belts
- The exhaust fan wheel is unbalanced or there is a
bearing problem; contact a qualified technician
- Verify and adjust Geo-Vary grease extractor according
to the manufacturers indications and refer to Annex 3
Exhaust hood is
working but does
not suck air as
usual
Duct problem
- Duct access door open in the exhaust duct or
obstruction in the exhaust duct
Exhaust fan problem
- Verify and adjust or change the exhaust fan motor
belts
Geo-Vary adjustment
- Verify and adjust
- Verify and adjust Geo-Vary grease extractor according
to the manufacturers indications and refer to Annex 3
Fire suppression
triggering
Fire or accidental trigger
ONCE THE DANGER IS ELIMINATED AND ALARMS ARE
NEUTRALIZED
- Clean as fast as possible the suppression liquid
- Call the company in charge of you fire suppression
system maintenance to put the system back in
operation
- If the system is equipped with a rearming relay or
Cadexair control panel, press on the reset button to
power the cooking equipment back on
Exhaust hood
lights not
working
- If the system is equipped with a Cadexair control
panel, press on the reset button inside the control
panel
- Verify if the light bulbs are in good condition
- Verify the electrical power to the lights (contact an
electrician if needed)
Cooking
equipment not
working
- If the system is equipped with a Cadexair control
panel, press on the reset button inside the control
panel
Auto-cleaning
system
Auto-cleaning system
not working
Verify that the water supply valve is open inside the
Cadexair control panel
- Activate the selector in test mode on the control panel
to veri
fy it’s operation; if the test works, adjust the BIO
option ON in the menu Set Param of the Bio automate
then contact Cadexair
- If the test does not work; verify the water supply to
the control panel and verify the good functioning of the
