Doc150313-01
Installation and maintenance manual
www.cadexair.com
16
1010, Boulevard Lionel Boulet
1-800-461-0668
Varennes, Québec, Canada J3X 1P7
ANNEX 3: Installation, adjustment and cleaning of Geo-Vary grease extractor
Position and adjust the opening of the Geo-Vary grease extractor according to the plan:
1. Unscrew the wing nut;
2. Move the guillotine to the required adjustment;
3. Screw back on the wing nut.
A bad adjustment may cause performance issues.
Cleaning of the Geo-Vary grease extractor
When necessary, remove the Geo-Vary from the exhaust hood filter cage carefully noting the guillotine
adjustment and position for each Geo-Vary.
•
Remove the Geo-Vary grease extractor from the exhaust hood filter cage. Remove the guillotine
from the extractor by removing the wing nut located inside the extractor, in the back.
•
Put the guillotine and extractor upside down in a dishwasher or simply wipe the inside surfaces
with detergent and hot water.
•
Put back the guillotine in the extractor according to hit initial setting and screw back the wing nut.
