13. Lower the vehicle by turning the wheel
wrench counterclockwise. Lower the jack
completely.
{
CAUTION:
Incorrect wheel nuts or improperly
tightened wheel nuts can cause the wheel
to come loose and even come off. This
could lead to an accident. Be sure to use
the correct wheel nuts. If you have to
replace them, be sure to get new GM
original equipment wheel nuts. Stop
somewhere as soon as you can and have
the nuts tightened with a torque wrench
to the proper torque specification. See
Capacities and Specifications on page 457
for wheel nut torque specification.
Notice:
Improperly tightened wheel nuts can
lead to brake pulsation and rotor damage.
To avoid expensive brake repairs, evenly
tighten the wheel nuts in the proper sequence
and to the proper torque specification. See
Capacities and Specifications on page 457
for
the wheel nut torque specification.
432
Summary of Contents for 2007 CTS
