background image

VEHICLE OPERATION

K

M0410pr-0920

26

•  Your vehicle has a patented, electronic braking system that 

automatically stops the vehicle when your child’s foot lifts from 
the pedal. Make sure your child is comfortable with steering the 
vehicle and automatically knows how to stop.

IMPORTANT!

 Use this vehicle 

ONLY

 outdoors. Most interior floor-

ing can be damaged by riding this vehicle indoors. Fisher-Price

®

 

will not be responsible for damage to the floor if the vehicle is 
used indoors.

To Back Up

•  Make sure the shifter is in the low speed 

 position 

1

.

•  Press down on the foot pedal 

2

. The vehicle goes forward at a 

maximum of 2

1

/

2

 mph 

3

. Help your child practice steering to learn 

how far and how quickly to turn the steering wheel when driving 
forward in low speed.

Beginner Use - Low Speed Drive

As assembled, your vehicle is ready to roll in low speed 
(2

1

/

2

 mph, maximum). It has been pre-set so it will only operate in 

low speed. After your child has mastered the basic skills of driving 
and understands the rules for safe driving, it’s time to remove the 
high speed lock-out screw to allow the vehicle to operate in low or 
high speed.

 See the instructions on this page to remove the high 

speed lock-out screw.

1

2

3

IMPORTANT!

 To avoid damaging the motors and gears, stop the 

vehicle before shifting from forward to reverse.
•  Once your child is completely comfortable with operating the vehicle 

in the forward mode, introduce reverse 

.

•  Make sure the shifter is in the reverse 

 position 

1

.

•  Press down on the foot pedal 

2

.The vehicle will go in reverse at a 

maximum of 2

1

/

2

 mph 

3

. The vehicle is designed to operate in low 

speed only in reverse. Help your child practice steering to learn how 
far and how quickly to turn the steering wheel when driving 
in reverse.

1

2

3

To Drive

•  Make sure the shifter is in the high speed  

  position 

1

.

•  Press down on the foot pedal 

2

. The vehicle goes forward at a 

maximum of 5 mph 

3

. Help your child practice steering to learn 

how far and how quickly to turn the steering wheel when driving 
forward in high speed.

1

2

3

Advanced Use - High Speed Drive

•  Before you disconnect the high speed lock-out, make sure your 

child knows how to steer, how to start and stop the vehicle and 
knows the rules for safe driving. When the high speed lock-out is 
disconnected, the vehicle can be driven forward in low speed 
(2

1

/

2

 mph, maximum) or high speed (5 mph, maximum).

•  Make sure the shifter is in the reverse 

 position.

•  Loosen and remove the screw in the shifter box.
•  Place the lock-out screw into the hole in the vehicle for future use. 

It can be re-inserted into the shifter box to lock-out high speed.

Remove 

lock-out screw 

for high speed.

Place 

lock-out screw 

here for storage.

Summary of Contents for ESCALADE H0410





































Reviews: