Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
256
Vehicle Care
{
Warning
Components under the bonnet can get
hot from running the engine. To help
avoid the risk of burning unprotected
skin, never touch these components until
they have cooled, and always use a glove
or towel to avoid direct skin contact.
Clear any snow from the bonnet before
opening.
To open the bonnet:
1. Pull the bonnet release lever with the
i
symbol. It is on the lower left side
of the instrument panel.
2. Go to the front of the vehicle and locate
the secondary release lever under the
front centre of the bonnet. Push the
secondary bonnet release lever to the
right to release.
3. After you have partially lifted the
bonnet, the gas strut system will
automatically lift the bonnet and hold it
in the fully open position.
To close the bonnet:
1. Before closing the bonnet, make sure all
filler caps are fitted on properly, and all
tools are removed.
2. Pull the bonnet down until the strut
system is no longer holding up the
bonnet.
3. Allow the bonnet to fall. Check to make
sure the bonnet is latched completely.
Repeat this process with additional force
if necessary.
{
Warning
Do not drive the vehicle if the bonnet is
not latched completely. The bonnet could
open fully, block your vision, and cause a
(Continued)
Warning (Continued)
crash. You or others could be injured.
Always close the bonnet completely
before driving.