Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
74
Seats and Restraints
3. Try to move the head restraint to make
sure that it is locked in place.
Securing Child Restraints (With
the Seat Belt in the Rear Seat)
When securing a child restraint with the
seat belts in a rear seat position, study the
instructions that came with the child
restraint to make sure it is compatible with
this vehicle.
If the child restraint has the ISOFIX system,
see
ISOFIX Child Restraint Systems
for
how and where to install the child restraint
using ISOFIX. If a child restraint is secured in
the vehicle using a seat belt and it uses a
top tether, see
for top tether anchor locations.
Do not secure a child seat in a position
without a top tether anchor if a national or
local law requires that the top tether be
anchored, or if the instructions that come
with the child restraint state that the top
tether must be anchored.
If the child restraint or vehicle seat position
does not have the ISOFIX system, you will
be using the seat belt to secure the child
restraint. Be sure to follow the instructions
that came with the child restraint.
If more than one child restraint needs to be
installed in the rear seat, be sure to read
1. Put the child restraint on the seat.
2. Pick up the latch plate and run the lap
and shoulder portions of the vehicle seat
belt through or around the child
restraint. Ensure the seat belt webbing is
routed as directly as possible and is not
caught on seat handles or plastic trim.
The child restraint instructions will show
you how.
3. Push the latch plate into the buckle until
it clicks.
Position the release button on the
buckle, away from the child restraint, so
that the seat belt can be quickly
unbuckled if necessary.
There must not be direct contact
between the child restraint and the push
button.
4. Follow the instructions in the child
restraint owner's manual to tighten and
lock the child restraint using the vehicle
seat belt.
5. If the child restraint has a top tether,
follow the child restraint manufacturer's
instructions regarding the use of the top
tether. See
ISOFIX Child Restraint Systems
.
6. Before placing a child in the child
restraint, make sure it is securely held in
place. Refer to your child restraint
manufacturer's instructions.
To remove the child restraint, follow the
instructions in the child restraint owner's
manual to unlock it. Unfasten the vehicle
seat belt and let it return to the stowed
position. If the top tether is attached to a
top tether anchor, disconnect it.