Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-16412942) - 2023 -
CRC - 5/25/22
76
Seats and Restraints
If the child restraint uses a top tether, see
ISOFIX Child Restraint Systems
for top
tether anchor locations.
Do not secure a child restraint in a position
without a top tether anchor if a national or
local law requires that the top tether must
be anchored, or if the instructions that come
with the child restraint say that the top
tether must be anchored.
When using the lap-shoulder belt to secure
the child restraint in this position, follow the
instructions that came with the child
restraint and the following instructions:
1. Move the seat as far back as it will go
before securing the forward-facing child
restraint. Move the seat upward or the
backrest to an upright position,
if needed, to get a tight installation of
the child restraint. There must be finger
clearance between the push button and
the child restraint.
When the airbag off switch has turned
off the front outboard passenger frontal
airbag, the off indicator in the airbag off
light should illuminate and remain
illuminated when you start the vehicle.
See
.
2. Put the child restraint on the seat.
3. Pick up the latch plate and run the lap
and shoulder portions of the vehicle seat
belt through or around the restraint.
Ensure the seat belt webbing is routed
as direct as possible and is not caught
on seat handles or plastic trim. The child
restraint instructions will show you how.
4. Push the latch plate into the buckle until
it clicks.
Position the release button on the
buckle, away from the child restraint, so
that the seat belt can be quickly
unbuckled if necessary.
5. Follow the instructions in the child
restraint owner's manual to tighten and
lock the child restraint when using the
vehicle seat belt.
6. If the child restraint has a top tether,
follow the child restraint manufacturer's
instructions regarding the use of the top
tether. See
ISOFIX Child Restraint Systems
.