TR-MAN-4500-A
Operator's Manual - 4000M 4500M
Page 19 of 46
Step 6
Start the retrieve cycle. Immediately check to see that the shut-off mechanism is
working properly.
UNWIND
/ STOP
REWIND
Figure 19 - Shut-off Bar Detail
img-00130.wmf
•
Manually lower the shut-off bar
from unwind position (vertical) to
the rewind position (angled).
•
Engage the tractor hydraulics to
begin the hose rewind.
•
Raise the shut-off bar to the STOP
(vertical) position. This should stop
the rotation of the drum.
•
If the drum does not stop,
immediately stop the rewind
cycle
by disengaging the tractors
hydraulic system. Check the valve
adjustment as shown on page 42.
•
If valve adjustment was required,
re-test the retrieve cycle.
If for any reason the shut-off system failed, major damage could result.
Check the automatic shut-off system before every retrieve cycle.
Never operate the machine if you discover a problem.
Step 7
With the shut-off system working properly, check the hose indexing system. The
hose should be tightly wound together. If the hose is improperly indexing, you will
notice the hose trying to climb up on itself or leave large gaps. If this happens, check
the indexer adjustment as shown on page 43.
Step 8
Disconnect the supply line from your machine.
Step 9
When the hose is fully recoiled, set the drum brake, lift the hydraulic stabilizer legs,
disengage the tractor hydraulics and raise the tongue jack.
Step 10
Tow the reel to the next set-up location and reconnect the supply line as required.
