EN / 6
NOTE!
Transport the scanner only in the original packaging to avoid damage to the device.
2.1 Unpacking and setting up the device
First, open the top of the box and remove the top foam cover with the optional accessories. Then you can hold the scanner by the two
recesses and pull it out of the box. Now the fi xation for the arm can be removed, the standard accessories are inside the fi xation.
Save the packaging for future transport (relocation, service, ...).
Dispose of waste materials in an environmentally friendly manner.
2.2 Select a setup area
Since the environment of the scanner has a signifi cant infl uence on the product, you should be careful when selecting its location and
observe the following:
•
Avoid rapidly changing lighting conditions such as moving shadows, offi ce lighting that fl ickers (fl uorescent lamps, LED...).
•
Never expose the scanner to direct sunlight.
•
Avoid direct proximity to heat sources (e.g. radiators, other electrical appliances, fi replaces, etc.).
•
Ensure that the installation site is level and vibration-free.
•
It must be ensured that there is no extraordinary exposure to dust, respectively poisons or corrosive gases at the installation site.
•
Select a mounting or installation location where liquids or objects cannot get into the scanner under any circumstances (e.g. conden-
sation, roof leaks, watering water, etc.).
•
Ensure that the mains plug of the power supply unit is always accessible.
•
The scanner may only be operated indoors.
Info: Strong external light or sunlight may affect the scan result.
This can lead to poor scan quality or to undesired deviations of the measurement result.
Summary of Contents for CS.Neo2
