Using Ares
64
©2021 CAE 905K640152 v1.2
CAE
Ares
Tracheostomy Tube Placement
The following instructions provide steps for adequate tracheostomy tube placement.
Learners can:
• Clean the tracheostomy site.
• Replace the tube.
Note:
The tracheostomy site is closed with a plug.
To place a tracheostomy tube:
1. Remove the neck skin band by detaching the velcro strips. Set it aside.
2. Remove the tracheal plug.
3. Prime the airway reservoir using silicone oil spray.
4. Place the tracheostomy tube into the tracheostomy site and secure it in place.
5. After the simulation, remove the tracheostomy tube and replace the plug.
Chest Excursion
The Live and Advanced configurations include spontaneous chest excursion that simulates a patient
breathing without the required external ventilation. The following chest excursion parameters can be
modified in Maestro:
•
Respiratory Rate:
Defines the number of excursions (chest rise) in one minute.
•
Apnea:
Disable the spontaneous chest excursion but still allows for excursion during
external ventilation.
•
Tidal Volume:
Changes the height of chest excursions.
•
Intrapleural Volume:
Disables chest excursion on the affected side but still allows for
excursion on the unaffected side.
Summary of Contents for Ares
