Using Ares
78
©2021 CAE 905K640152 v1.2
CAE
Ares
A standard transthoracic cardiac pacemaker can be connected to the simulator using the anterior
contacts. The simulator automatically detects and responds to pacing signals (from 20 mA to 200 mA,
in increments of 10).
For more information, see the
Maestro forAresUser Guide.
Blood Pressure
Ares supports non-invasive blood pressure measurements, and systolic and diastolic readings can be
obtained and manipulated through the software.
Systolic and Diastolic Blood Pressure
To manually adjust the systolic and/or diastolic blood pressure:
1. From the Cardiovascular panel, select the parameter of desired blood pressure.
2. Set the pressure by moving the blue slider left or right, or by typing in a value.
3. Select
Accept
to exit and save the changes. The switch is now orange, indicating a change
has been made.
4. If using CAE Physiology (optional), return to the programmed physiologic model by
selecting the switch and turning the Override switch to Modeled.
Non-Invasive Blood Pressure Measurement
Blood pressure can be taken manually on the right arm. Non-invasive blood pressure (NIBP)
monitoring techniques can be used by attaching the standard cuff modified with a T-fitting and
adapters and using a stethoscope modified with the StethoSym assembly.
For information on attaching the NIBP arm and modifying the blood pressure cuff, see the
Setup
section in this user guide.
Summary of Contents for Ares
