Using LucinaAR
30
©2019 CAE 905K472052 v2.1
CAE
LucinaAR
4. Follow the changes of the
Host Client
.
NOTE
:
Tapping the
Home
button exits the experience.
Holographic Mode
In this mode, you will have essentially the same simulation as practice mode, but the physical
manikin will be replaced by a holograph.
Single User
1. Visualize the four corners of the Fitbox and tap to continue.
2. On the
Select your experience
menu:
a. Tap
Single User
.
b. Tap
Holographic Manikin
.
c. To start the calibration, tap
Start
.
3. Gaze to any plane surface until you see the circle shown below.
Calibration Image
4. Tap to select that position.