CAE Healthcare Vimedix Cardiac User Manual Download

Page: 91 / 480

Using the Multipurpose

(Cardiac/Abdo)

Simulator

For more information on the metrics parameters, see

Metrics Parameters

Target Cut Planes Panel Buttons

Target cut planes are learning tools designed to allow learners to practice techniques in the absence of
an instructor. The

Target Cut Planes

panel has three buttons:

Stop Metrics

button,

New

button and

the

TCP Menu

button. By clicking the

New

button, the user creates the target cut plane from the

current probe position. By clicking the

TCP Menu

button, the user can load a TCP and record metrics.

Target cut plane metrics are used to record a learner’s actions during a target cut plane exercise.

Creating a Target Cut Plane

Users can create personal TCPs that are saved with the loaded pathology under the

Personal

tab in the

Target cut planes window.

NOTE:

A user-created or Personal TCP is only valid for the pathology that was loaded during its

creation.

To create a Personal TCP:

1. Select a pathology, if desired.

2. Position the probe on the mannequin to obtain the desired view in the

Ultrasound and AR displays.

Target Cut Planes Panel Buttons

The

New

button saves the current position of the probe to create a

Personal target cut plane.

The

TCP Menu

button opens the Target cut plane window where users

can access Base or Personal TCPs.

The

Stop Metrics

button allows users to stop recording metrics after

starting a metrics session from the Target cut plane window.

Summary of Contents for Vimedix Cardiac
































































































































































































































































































































































































































































































Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Related manuals for Vimedix Cardiac

Brands by name

Popular brands

CAE Healthcare Vimedix Cardiac, User Manual

Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Related manuals for Vimedix Cardiac

Brands by name

Popular brands