manualshive.com logo in svg

CAE SimuFlite Citation Bravo, Pilot Training Manual

The CAE SimuFlite Citation Bravo pilot training manual is an essential resource for mastering the intricacies of flying this aircraft. Download this comprehensive manual for free from our website 88.208.23.73:8080 to access a wealth of information, ensuring a safe and knowledgeable flight experience.

Share
Download
background image

Avionics

Citation Bravo

Developed for Training Purposes

5B-53

September 2005

Flight Control 

Systems

The Primus 1000 Integrated Avion-
ics System is a fail-passive, complete
automatic flight control system. It
replaces the conventional ADI and
HSI with displays that duplicate these
instruments electronically.

The primary component of the sys-
tem is the IC-600 Display Guidance
Computer (IC-600 DGC), which con-
tains the symbol generator (drives the
high-resolution, black-matrix,
shadow-mask color cathode ray tube
displays), the flight director, and the
autopilot computer. The flight direc-
tors and autopilot (which operates
from the pilot's IC-600 only) can be
used independently or together.

Other standard avionics systems
comprising the Primus 1000 Inte-
grated Avionics System are the AZ-
850 MADCs, Primus 660 Weather
Radar system, and the attitude and
heading reference system. Optional
avionics systems include the TCAS,
Enhanced Ground Proximity Warn-
ing system (EGWPS), and dual
Flight Management Systems (FMS).

The Integrated Avionics System dig-
itally processes attitude, heading,
navigation, and air data information,
which is entered and presented on
the following standard equipment:

n

two DU-870 Primary Flight Dis-
plays (PFDs)

n

one DU-870 Multifunction Dis-
play (MFD)

n

two PFD and one MFD bezel con-
trollers

n

two DC-550 Display Controllers
one MC-800 Multifunction Dis-
play Controller

n

two MS-560 Mode Selectors

n

one RI-553 Remote Instrument
Controller.

Information displayed by the IC-600
DGC includes heading, course, radio

bearing, pitch and roll attitude, air-
speed, altitude, vertical speed,
selected altitude target with alert
annunciator, barometric altimeter set-
ting, radio altitude, course deviation,
glideslope deviation, to from indica-
tions, and DME indications. The IC-
600 DGC is the focal point of infor-
mation flow by converting input data
and information to the pilot-selected
formats, displaying them on the PFDs
attitude director indicator and HSI.

The IC-600 DGC also generates infor-
mation that appears on the MFD and
computes the flight director steering
information and autopilot function.
The system interconnects two IC-600
DGCs to share, compare, and commu-
nicate processed information. Wrap-
around signals are used for critical
parameters such as pitch or roll data,
IAS, barometric altitude, and baro set.

n

The No. 1 IC-600 DGC drives the
pilot displays and contains a sym-
bol generator, flight director, yaw
damper, and autopilot.

n

The No. 2 IC-600 DGC drives the
copilot displays and contains a
symbol generator and independent
flight director functions.

The PFD and MFD controllers display
critical flight information operation
and they operate the checklist func-
tion. The PFD bezel controllers and
MFD bezel controller on the display
units are used to select navigation and
aircraft performance displays.

The symbol generators drive the three
display units and, in the case of a dis-
play unit failure, either pilot's PFD
can be reverted to the MFD. The
symbol generators function as the
data processor for the display system.
It receives digital and discrete inputs,
organizes the information into the
correct formats, and transmits the for-
mats to the display units.

NOTE:

Refer to applicable pilot’s 

manuals and the Aircraft Flight Man-
ual for a thorough discussion and 
operating procedures for the particu-
lar pieces of the flight control system.

Summary of Contents for Citation Bravo















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Citation Bravo

Salvis KTM Series Translation Of The Operating Instructions preview
KTM Series
Brand: Salvis Pages: 40
IDEAL 99 Assembly Instruction preview
99
Brand: IDEAL Pages: 2
DARAY BH200 Operating & Installation Manual preview
BH200
Brand: DARAY Pages: 24
Jafar 7110 Operation And Maintenance Manual preview
7110
Brand: Jafar Pages: 9
Harken T2 Instructions preview
T2
Brand: Harken Pages: 4
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Brand: Panasonic Pages: 73
Xoop Lighting B150 User Manual preview
B150
Brand: Xoop Lighting Pages: 20
Vari Lite VL550 Service Manual preview
VL550
Brand: Vari Lite Pages: 132
4iiii FLiiiight Owner'S Manual preview
FLiiiight
Brand: 4iiii Pages: 36
4iiii FLiiiight User Manual preview
FLiiiight
Brand: 4iiii Pages: 34
4iiii Sportiiiis User Manual preview
Sportiiiis
Brand: 4iiii Pages: 19
4EVAC IMPACT Reference Manual preview
IMPACT
Brand: 4EVAC Pages: 27
ABS ABS-Lock DH04 Series Manual preview
ABS-Lock DH04 Series
Brand: ABS Pages: 4
XanLite EXPERT Quick Start Manual preview
EXPERT
Brand: XanLite Pages: 4
Haki 564 User Manual preview
564
Brand: Haki Pages: 24
Dakota Digital VHX-66F-BRO Installation preview
VHX-66F-BRO
Brand: Dakota Digital Pages: 5
Garelick 71095 Mounting And Operating Instructions preview
71095
Brand: Garelick Pages: 4
Raymarine H6 System Installation Manual preview
H6
Brand: Raymarine Pages: 124

Brands by name

Popular brands

Load more brands