Using Luna
48
©2019 CAE 905K560252 v1.0
CAE
Luna
ECG Signals
To produce ECG signals on a monitor, connect a 3-lead unit to the three ECG contacts (or snaps)
located on the manikin.
ECG Contacts
Note:
When using a Zoll monitor, ensure that Luna is running on a wireless configuration (tablet with
USB-C adapter and wireless dongle).
Simulated Defibrillation
Luna can receive simulated electrical therapy in two ways: by administering defibrillation through the
software or using the SymDefib device.
To defibrillate using Maestro software:
1. From the Run screen, tap
Treatments
icon.
2. Tap desired defibrillation option (monophasic or biphasic) from the menu.
3. Set values for desired joules and tap
Apply treatment
to administer simulated shock.
To defibrillate using SymDefib:
1. Connect the SymDefib cable to the defibrillator using the cables provided. The SymDefib
system supports Phillips defibrillators without a cable adapter. If using Zoll or Physio-
Control defibrillators, you must use the appropriate adapter (optional purchase) between
the cable on the SymDefib and the defibrillator.
2. If using a plug (instead of the battery), plug the power supply into the back port of the
SymDefib box.
3. Connect the electrode pad cable to the right port on the front side of the SymDefib box.
4. With the manikin started, turn on the SymDefib and verify the status light flashes green to
indicate it is on.
Connect to the three
ECG contacts
